| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VJ58 |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - 11/2017] |
| Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: Data Signal Circuit between Radio Receiver and Stereo Jack Adapter; 2016 - 2017 MY Sienna [12/2015 - 11/2017] | ||
|
Data Signal Circuit between Radio Receiver and Stereo Jack Adapter |
DESCRIPTION
The No. 1 stereo jack adapter assembly sends the sound data signal or image data signal from a device to the radio and display receiver assembly via this circuit.
WIRING DIAGRAM
Refer to USB Audio System Recognition/Play Error (See page
![2016 - 2017 MY Sienna [12/2015 - 11/2017]; AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: USB Audio System Recognition/Play Error](/t3Portal/stylegraphics/info.gif)
).
PROCEDURE
|
1. |
CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY) |
(a) Disconnect the D185 radio and display receiver assembly connector.
(b) Disconnect the D184 No. 1 stereo jack adapter assembly connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
D185-2 (UDO-) - D184-2 (UDO-) |
Always |
Below 1 Ω |
|
D185-3 (UDO+) - D184-3 (UDO+) |
Always |
Below 1 Ω |
|
D185-2 (UDO-) - Body ground |
Always |
10 kΩ or higher |
|
D185-3 (UDO+) - Body ground |
Always |
10 kΩ or higher |
| OK |
|
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (See page
|
| NG |
|
REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|