- Navigation antenna assembly
- Radio and display receiver assembly
| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VJ4P |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - 11/2017] |
| Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: B15C0,B15C1; Short in GPS Antenna; 2016 - 2017 MY Sienna [12/2015 - 11/2017] | ||
|
DTC |
B15C0 |
Short in GPS Antenna |
|
DTC |
B15C1 |
Open in GPS Antenna |
DESCRIPTION
These DTCs are stored when a malfunction occurs in the navigation antenna assembly.
|
DTC Code |
DTC Detection Condition |
Trouble Area |
|---|---|---|
|
B15C0 |
Navigation antenna error |
|
|
B15C1 |
Error of the power source to the navigation antenna |
CAUTION / NOTICE / HINT
NOTICE:
Check that the navigation antenna assembly cable is properly installed and does not have any sharp bends, pinching or loose connections before performing following procedure.
PROCEDURE
|
1. |
CHECK CONNECTION OF NAVIGATION ANTENNA ASSEMBLY |
(a) Check if the navigation antenna assembly is securely connected to the radio and display receiver assembly.
OK:
Navigation antenna assembly is securely connected.
| NG |
|
SECURELY CONNECT NAVIGATION ANTENNA ASSEMBLY |
|
|
2. |
CHECK NAVIGATION ANTENNA ASSEMBLY |
(a) Replace the navigation antenna assembly with a known good one (See page
![2016 - 2020 MY Sienna [12/2015 - ]; NAVIGATION / MULTI INFO DISPLAY: NAVIGATION ANTENNA: REMOVAL](/t3Portal/stylegraphics/info.gif)
).
(b) Clear the DTCs (See page
).
(c) Check for DTCs (See page
).
OK:
No DTCs are output.
| OK |
|
END (NAVIGATION ANTENNA ASSEMBLY WAS DEFECTIVE) |
| NG |
|
|
|