| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VJ38 |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - ] |
| Title: AUDIO / VIDEO: STEREO JACK ADAPTER ASSEMBLY: REMOVAL; 2016 - 2020 MY Sienna [12/2015 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for both the RH and LH sides.
- The procedure described below is for the RH side.
PROCEDURE
1. REMOVE NO. 2 SWITCH HOLE BASE
(See page
![2016 - 2017 MY Sienna [12/2015 - 11/2017]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL+](/t3Portal/stylegraphics/info.gif)
)
2. REMOVE NO. 1 SWITCH HOLE BASE
(See page
)
3. REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY
(a) Disengage the 2 claws to remove the No. 1 stereo jack adapter assembly.
4. REMOVE CONSOLE BOX BEZEL (for Slide Console Type)
(See page
)
5. REMOVE CONSOLE REAR END PANEL GARNISH (for Fixed Console Type)
(See page
)
6. REMOVE VIDEO (VIDEO ADAPTER) TERMINAL (for Slide Console Type)
(a) Disengage the 4 claws to remove the video terminal.
7. REMOVE VIDEO (VIDEO ADAPTER) TERMINAL (for Fixed Console Type)
(a) Disengage the 4 claws to remove the video terminal.
8. DISCONNECT BACK DOOR WEATHERSTRIP
9. REMOVE BACK DOOR SCUFF PLATE
(See page
)
10. DISCONNECT REAR NO. 2 OUTER SEAT BELT ASSEMBLY RH
HINT:
Use the same procedure as for the LH side (See page
).
11. REMOVE REAR DOOR SCUFF PLATE RH
(See page
)
12. DISCONNECT SLIDE DOOR WEATHERSTRIP RH
13. REMOVE QUARTER TRIM PANEL ASSEMBLY RH
(See page
)
14. REMOVE SWITCH BEZEL
(a) Disconnect the connector.
(b) Disengage the clamp.
(c) Disengage the 5 claws to remove the switch bezel.
15. REMOVE HEADPHONE TERMINAL
(a) Disengage the 3 claws to remove the headphone terminal.
|
|