Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VJ28 |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 -
] |
Title: AUDIO / VIDEO: FRONT DOOR SPEAKER: INSPECTION; 2016 - 2020 MY Sienna [12/2015 - ] |
INSPECTION
PROCEDURE
1. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY (except 10 Speakers)
(a) With the speaker installed, check that there is no looseness or other abnormalities.
(b) Check that there is no foreign matter in the speaker, no tears on the speaker's cone part or other abnormalities.
(c) Measure the resistance of the speaker.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
1 - 2
|
Always
|
Approximately 4 Ω
|
If the result is not as specified, replace the front No. 1 speaker assembly.
Text in Illustration
*a
|
Component without harness connected
(Front No. 1 Speaker Assembly)
|
|
|
2. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY (for 10 Speakers)
(a) With the speaker installed, check that there is no looseness or other abnormalities.
(b) Check that there is no foreign matter in the speaker, no tears on the speaker's cone part or other abnormalities.
(c) Measure the resistance of the speaker.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
1 - 2
|
Always
|
1.65 to 2.15 Ω
|
If the result is not as specified, replace the front No. 1 speaker assembly.
Text in Illustration
*a
|
Component without harness connected
(Front No. 1 Speaker Assembly)
|
|
|
|