| Last Modified: 08-28-2024 | 6.11:8.1.0 | Doc ID: RM100000000VJ17 |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - ] |
| Title: STEERING GEAR / LINKAGE: STEERING GEAR: REMOVAL; 2016 - 2020 MY Sienna [12/2015 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
NOTICE:
When disconnecting the steering intermediate shaft assembly and pinion shaft of steering gear assembly, be sure to place matchmarks before servicing.
PROCEDURE
1. SECURE STEERING WHEEL
|
(a) Secure the steering wheel with the seat belt in order to prevent it from rotating. HINT: This operation is necessary to prevent damage to the spiral cable. |
|
2. REMOVE FRONT STABILIZER BAR (for 2WD)
(See page
![2016 - 2020 MY Sienna [12/2015 - ]; FRONT SUSPENSION: FRONT STABILIZER BAR (for 2WD): REMOVAL](/t3Portal/stylegraphics/info.gif)
)
3. REMOVE FRONT STABILIZER BAR (for AWD)
(See page
)
4. SEPARATE STEERING INTERMEDIATE SHAFT ASSEMBLY
|
(a) Put matchmarks on the steering intermediate shaft assembly and steering link assembly. Text in Illustration
|
|
|
(b) Remove the bolt. and separate the steering intermediate shaft assembly from the steering link assembly. |
|
5. REMOVE STEERING LINK ASSEMBLY
|
(a) Remove the 2 bolts and 2 nuts and steering link assembly. NOTICE: Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured. |
|
(b) Pull out the steering link assembly towards the left side of the vehicle.
6. REMOVE TIE ROD ASSEMBLY LH
|
(a) Put matchmarks on the tie rod assembly LH and steering gear assembly. Text in Illustration
|
|
(b) Loosen the lock nut, and remove the tie rod assembly LH and lock nut.
7. REMOVE TIE ROD ASSEMBLY RH
HINT:
Perform the same procedure as for the LH side.
|
|