| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VIZ4 |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - ] |
| Title: PARKING BRAKE: PARKING BRAKE SWITCH: INSPECTION; 2016 - 2020 MY Sienna [12/2015 - ] | ||
INSPECTION
PROCEDURE
1. INSPECT PARKING BRAKE SWITCH ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
Text in Illustration
|
On |
|
Off |
Standard Resistance:
|
Tester Connection |
Switch Condition |
Specified Condition |
|---|---|---|
|
Switch connector terminal - Switch body |
On (Shaft not pressed) |
Below 1 Ω |
|
Off (Shaft pressed) |
10 kΩ or higher |
If the result is not as specified, replace the parking brake switch assembly.
|
|