Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VIY4
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 -           ]
Title: BRAKE SYSTEM (OTHER): BRAKE PEDAL: REMOVAL; 2016 - 2020 MY Sienna [12/2015 -        ]

REMOVAL

PROCEDURE

1. REMOVE KNEE AIRBAG ASSEMBLY

(See page 2016 - 2020 MY Sienna [12/2015 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: KNEE AIRBAG ASSEMBLY: REMOVAL )

2. SEPARATE BRAKE MASTER CYLINDER PUSH ROD CLEVIS

(a) Remove the clip and brake master cylinder push rod clevis pin and separate the brake master cylinder push rod clevis from the brake pedal support assembly.

3. REMOVE STOP LIGHT SWITCH ASSEMBLY

2016 - 2020 MY Sienna [12/2015 -        ]; LIGHTING (EXT): STOP LIGHT SWITCH: REMOVAL+

4. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

(a) Disengage the 2 claws and remove the stop light switch mounting adjuster.

5. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY

(a) Disconnect the connector and separate the harness clamp.

(b) Remove the bolt and separate the brake pedal support assembly from the instrument panel reinforcement.

(c) Remove the 4 nuts and brake pedal support assembly.

HINT:

Push out the brake booster assembly toward the engine compartment if necessary.

NOTICE:

Do not apply excessive force to the brake lines.