Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VIXU |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 -
] |
Title: BRAKE SYSTEM (OTHER): BRAKE MASTER CYLINDER: DISASSEMBLY; 2016 - 2020 MY Sienna [12/2015 - ] |
DISASSEMBLY
PROCEDURE
1. REMOVE BRAKE MASTER CYLINDER TO WAY TUBE
(a) Mount the brake master cylinder sub-assembly in a vise.
NOTICE:
Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.
(b) Using a union nut wrench (12 mm), remove the brake master cylinder to way tube from the No. 2 brake tube way and brake master cylinder body.
|
|
2. REMOVE NO. 2 BRAKE TUBE WAY
(a) Remove the No. 2 brake tube way from the brake master cylinder body.
3. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY
(a) Mount the brake master cylinder sub-assembly in a vise.
NOTICE:
Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.
(b) Using a pin punch (5 mm) and a hammer, tap out the straight pin, and remove the brake master cylinder reservoir sub-assembly.
|
|
4. REMOVE MASTER CYLINDER RESERVOIR GROMMET
(a) Remove the 2 master cylinder reservoir grommets from the brake master cylinder reservoir assembly.
|