Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VIX9
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 -           ]
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VSC OFF SWITCH: INSPECTION; 2016 - 2020 MY Sienna [12/2015 -        ]

INSPECTION

PROCEDURE

1. INSPECT VSC OFF SWITCH

(a) Disconnect the VSC OFF switch connector.

(b) Measure the resistance according to the value(s) in the table below.

Text in Illustration

*a

Component without harness connected

(VSC OFF Switch)

*b

Not pushed in

*c

Pushed in

Standard Resistance:

Tester Connection

Switch Condition

Specified Condition

6 (+) - 3 (E)

Switch is pushed in

Below 1 Ω

6 (+) - 3 (E)

Switch is not pushed in

10 kΩ or higher

If the value is not as specified, replace the VSC OFF switch.