Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VIWX |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 -
] |
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: FRONT SPEED SENSOR: REMOVAL; 2016 - 2020 MY Sienna [12/2015 - ] |
REMOVAL
CAUTION / NOTICE / HINT
HINT:
-
Use the same procedure for the LH side and RH side.
-
The following procedure is for the LH side.
-
If the sensor rotor needs to be replaced, replace it together with the front drive shaft assembly.
PROCEDURE
1. REMOVE FRONT WHEEL
2. REMOVE FRONT WHEEL OPENING EXTENSION PAD
3. SEPARATE FRONT FENDER LINER
4. REMOVE FRONT SPEED SENSOR
(a) Disconnect the front speed sensor connector and remove the 2 clamps.
|
|
(b) Remove the bolt and No. 3 sensor clamp from the body.
Text in Illustration
|
|
(c) Remove the bolt, No. 2 sensor clamp and front brake flexible hose together from the shock absorber assembly.
Text in Illustration
*1
|
No. 2 Sensor Clamp
|
*2
|
Front Brake Flexible Hose
|
|
|
(d) Remove the bolt, No. 1 sensor clamp and front speed sensor.
Text in Illustration
NOTICE:
-
Prevent foreign matter from attaching to the front speed sensor tip.
-
Clean the speed sensor installation hole and the contact surfaces every time the front speed sensor is removed.
|
|
|