Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VIV9 |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 - 11/2017] |
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM: DTC CHECK / CLEAR; 2016 - 2017 MY Sienna [12/2015 - 11/2017] |
DTC CHECK / CLEAR
1. DTC CHECK/CLEAR (When Using the Techstream)
(a) Check for DTCs.
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Read the DTCs following the prompts on the Techstream. Enter the following menus: Chassis / ABS/VSC/TRAC / Trouble Codes.
(5) Check the details of the DTCs (See page
).
(b) Clear the DTCs.
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Operate the Techstream to clear the codes. Enter the following menus: Chassis / ABS/VSC/TRAC / Trouble Codes.
(5) According to the display on the Techstream, select the trouble code data display with the clear button.
2. DTC CHECK/CLEAR (When not Using the Techstream)
(a) Check for DTCs.
(1) Using SST, connect terminals TC and CG of the DLC3.
SST: 09843-18040
Text in Illustration
(2) Turn the ignition switch to ON.
(3) Observe the blinking pattern of the ABS warning and SLIP indicator lights in order to identify the DTC.
HINT:
If no code appears, inspect the TC and CG terminal circuit, and ABS warning and SLIP indicator light circuits.
Trouble Area
|
See Procedure
|
TC and CG terminal circuit
|
|
ABS warning light circuit (Remains on)
|
|
ABS warning light circuit (Does not come on)
|
|
SLIP indicator light circuit (Remains on)
|
|
SLIP indicator light circuit (Does not come on)
|
|
(4) Count the number of blinks of the ABS warning and SLIP indicator lights.
HINT:
-
When the system is operating correctly, each light will blink continuously in a pattern of 0.25 seconds on, then 0.25 seconds off.
-
When one DTC is output, each light will output the same code at 4 second intervals. (For example, Code 21 would be output as 2 flashes, a 1.5-second pause, and then 1 flash).
-
When 2 or more DTCs are output, each light will output a different code at 2.5-second intervals, and when all codes have been output, there will be a 4-second pause and the sequence will repeat.
-
When multiple codes are set, they are output in order starting with the lowest DTC number.
(5) The codes are explained in the code table.
ABS DTC
Warning Light Display
|
Techstream Display
|
11
|
C0278
|
12
|
C0279
|
13
|
C0273
|
14
|
C0274
|
21
|
C0226
|
22
|
C0236
|
23
|
C0246
|
24
|
C0256
|
25
|
C1225
|
31
|
C1401
|
C1405
|
32
|
C1402
|
C1406
|
33
|
C1403
|
C1407
|
34
|
C1404
|
C1408
|
35
|
C1413
|
36
|
C1414
|
38
|
C1415
|
39
|
C1416
|
41
|
C120B*2
|
C1241
|
C1417
|
43
|
C1232*2
|
C1243
|
44
|
C1419
|
C1420*2
|
C1442
|
45
|
C1245
|
46
|
C1421
|
C1422
|
C1423
|
C1424
|
C1449*2
|
49
|
C1425
|
C1426
|
51
|
C1427
|
C1428
|
59
|
C1203*2
|
67
|
C1429
|
C1430
|
C1431
|
91
|
C1361
|
94
|
U0073
|
95
|
C1240*2
|
U0124
|
97
|
C1381
|
98
|
C1336*2
|
VSC DTC
Indicator Light Display
|
Techstream Display
|
31
|
C1432
|
C1433
|
C1434
|
32
|
C1232*3
|
34
|
C1435
|
C1436
|
C1443
|
36
|
C1210
|
39
|
C1336*3
|
43*1
|
-
|
53
|
C1203*3
|
62
|
U0123
|
63
|
U0126
|
65
|
C1437
|
U0100
|
66
|
C1290
|
C1439
|
C1445
|
98
|
C1440
|
C1441*3
|
*1: This DTC is output when the VSC system detects a malfunction in the ABS.
*2: w/ VDIM
*3: w/o VDIM
(6) After completing the check, disconnect terminals TC and CG of the DLC3 to turn off the display.
If 2 or more DTCs are detected at the same time, the DTCs will be displayed in ascending order.
(b) Clear the DTCs.
(1) Using SST, connect terminals TC and CG of the DLC3.
SST: 09843-18040
Text in Illustration
(2) Turn the ignition switch to ON.
(3) Clear the DTCs stored in the ECU by depressing the brake pedal 8 times or more within 5 seconds.
(4) Check that the warning light indicates a normal system code.
(5) Remove SST from the terminals of the DLC3.
HINT:
Clearing the DTCs cannot be performed by disconnecting the battery terminal or the ECU-IG NO. 1 fuse.
3. END OF DTC CHECK/CLEAR
(a) Turn the ignition switch to ON.
(b) Check that the ABS warning and SLIP indicator lights go off within approximately 3 seconds after turning the ignition switch to ON.
|