| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VIUM |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - ] |
| Title: TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING ECU: REMOVAL; 2016 - 2020 MY Sienna [12/2015 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
NOTICE:
Before removing the tire pressure warning ECU, read the registered transmitter IDs of all wheels and write them down to use for re-registration of transmitter IDs (See page
![2016 - 2020 MY Sienna [12/2015 - ]; TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM: REGISTRATION](/t3Portal/stylegraphics/info.gif)
).
PROCEDURE
1. REMOVE FRONT DOOR SCUFF PLATE LH
HINT:
Use the same procedure as for the RH side (See page
).
2. REMOVE COWL SIDE TRIM BOARD LH
HINT:
Use the same procedure as for the RH side (See page
).
3. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
4. REMOVE NO. 1 INSTRUMENT PANEL LOWER FINISH PANEL
5. REMOVE TIRE PRESSURE WARNING ECU
|
(a) Disconnect the connector from the tire pressure warning ECU. |
|
(b) Remove the nut and tire pressure warning ECU.
|
|