Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VIU9
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 -           ]
Title: TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM: C2171/71; Transmitter ID not Registered; 2016 - 2020 MY Sienna [12/2015 -        ]

DTC

C2171/71

Transmitter ID not Registered

DESCRIPTION

The transmitter IDs of each tire pressure warning valve and transmitter are registered to the tire pressure warning ECU.

When the IDs have never been registered, a DTC is output.

DTC No.

DTC Detection Condition

Trouble Area

C2171/71

Transmitter ID is not registered. (When a transmitter ID is unregistered for 3 minutes or more)

Tire pressure warning ECU

CAUTION / NOTICE / HINT

NOTICE:

  • When replacing the tire pressure warning ECU, read the transmitter IDs stored in the old ECU using the Techstream and note them down before removal.
  • It is necessary to perform initialization (See page 2016 - 2020 MY Sienna [12/2015 -        ]; TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM: INITIALIZATION ) after registration (See page 2016 - 2020 MY Sienna [12/2015 -        ]; TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM: REGISTRATION ) of the transmitter IDs into the tire pressure warning ECU after the ECU has been replaced.

PROCEDURE

1.

CONFIRM REGISTRATION CONDITION (REGISTERED TRANSMITTER IDS)

(a) Turn the ignition switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the ignition switch to ON.

(d) Turn the Techstream on.

(e) Enter the following menus: Chassis / Tire Pressure Monitor / Data List.

(f) Check the values by referring to the table below.

Tire Pressure Monitor

Tester Display

Measurement Item/Display

Normal Condition

Diagnostic Note

Registered ID1 Code

Registered ID1 code/

min.: 0

max.: FFFFFFFF*

The transmitter ID registered in the transmitter ID1 is displayed

*: Displayed only when the transmitter ID is not registered.

Registered ID2 Code

Registered ID2 code/

min.: 0

max.: FFFFFFFF*

The transmitter ID registered in the transmitter ID2 is displayed

*: Displayed only when the transmitter ID is not registered.

Registered ID3 Code

Registered ID3 code/

min.: 0

max.: FFFFFFFF*

The transmitter ID registered in the transmitter ID3 is displayed

*: Displayed only when the transmitter ID is not registered.

Registered ID4 Code

Registered ID4 code/

min.: 0

max.: FFFFFFFF*

The transmitter ID registered in the transmitter ID4 is displayed

*: Displayed only when the transmitter ID is not registered.

OK:

The registered transmitter IDs are displayed on the tester screen.

Result

Result

Proceed to

NG

A

OK

B

B

GO TO STEP 4

A

2.

PERFORM REGISTRATION (TRANSMITTER ID)

(a) Register the transmitter IDs for all 4 tires (See page 2016 - 2020 MY Sienna [12/2015 -        ]; TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM: REGISTRATION ).

NEXT

3.

PERFORM INITIALIZATION

(a) Perform initialization (See page 2016 - 2020 MY Sienna [12/2015 -        ]; TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM: INITIALIZATION ).

NEXT

4.

READ VALUE USING TECHSTREAM (TIRE INFLATION PRESSURE)

(a) Turn the ignition switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the ignition switch to ON.

(d) Turn the Techstream on.

(e) Enter the following menus: Chassis / Tire Pressure Monitor / Data List.

(f) Check the values by referring to the table below.

Tire Pressure Monitor

Tester Display

Measurement Item/Range

Normal Condition

Diagnostic Note

ID1 Tire Inflation Pressure

ID1 tire inflation pressure /

min.: Absolute pressure / 100 kPa (1 kgf/cm2, 14 psi), Relative pressure / 0 kPa (0 kgf/cm2, 0 psi)

max.: Absolute pressure / 449.35 kPa (4.6 kgf/cm2, 65 psi), Relative pressure / 349.35 kPa (3.6 kgf/cm2, 51 psi)

Actual tire inflation pressure

If 100 kPa (1 kgf/cm2, 14 psi) is displayed for absolute pressure or 0 kPa (0 kgf/cm2, 0 psi) is displayed for relative pressure, data has not been received.*

ID2 Tire Inflation Pressure

ID2 tire inflation pressure /

min.: Absolute pressure / 100 kPa (1 kgf/cm2, 14 psi), Relative pressure / 0 kPa (0 kgf/cm2, 0 psi)

max.: Absolute pressure / 449.35 kPa (4.6 kgf/cm2, 65 psi), Relative pressure / 349.35 kPa (3.6 kgf/cm2, 51 psi)

Actual tire inflation pressure

If 100 kPa (1 kgf/cm2, 14 psi) is displayed for absolute pressure or 0 kPa (0 kgf/cm2, 0 psi) is displayed for relative pressure, data has not been received.*

ID3 Tire Inflation Pressure

ID3 tire inflation pressure /

min.: Absolute pressure / 100 kPa (1 kgf/cm2, 14 psi), Relative pressure / 0 kPa (0 kgf/cm2, 0 psi)

max.: Absolute pressure / 449.35 kPa (4.6 kgf/cm2, 65 psi), Relative pressure / 349.35 kPa (3.6 kgf/cm2, 51 psi)

Actual tire inflation pressure

If 100 kPa (1 kgf/cm2, 14 psi) is displayed for absolute pressure or 0 kPa (0 kgf/cm2, 0 psi) is displayed for relative pressure, data has not been received.*

ID4 Tire Inflation Pressure

ID4 tire inflation pressure /

min.: Absolute pressure / 100 kPa (1 kgf/cm2, 14 psi), Relative pressure / 0 kPa (0 kgf/cm2, 0 psi)

max.: Absolute pressure / 449.35 kPa (4.6 kgf/cm2, 65 psi), Relative pressure / 349.35 kPa (3.6 kgf/cm2, 51 psi)

Actual tire inflation pressure

If 100 kPa (1 kgf/cm2, 14 psi) is displayed for absolute pressure or 0 kPa (0 kgf/cm2, 0 psi) is displayed for relative pressure, data has not been received.*

HINT:

  • *: It may take up to 5 or 6 minutes until the values are displayed.
  • When no "ID Tire Inflation Pressure" has changed, rotate the tire 90 to 270°. Then recheck it.

Result

Result

Proceed to

All tire pressure readings are equal to specified values.

A

Tire pressure values are not displayed.

B

A

END

B

REPLACE TIRE PRESSURE WARNING ECU