| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VIT4 |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - ] |
| Title: FRONT SUSPENSION: FRONT STABILIZER BAR (for 2WD): REMOVAL; 2016 - 2020 MY Sienna [12/2015 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
NOTICE:
When disconnecting the steering intermediate shaft assembly and pinion shaft of steering link assembly, be sure to place matchmarks before servicing.
PROCEDURE
1. REMOVE FRONT WHEELS
2. SEPARATE FRONT SPEED SENSOR LH
![2016 MY Sienna [12/2015 - 08/2016]; DRIVE SHAFT / PROPELLER SHAFT: FRONT DRIVE SHAFT ASSEMBLY: REMOVAL+](/t3Portal/stylegraphics/info.gif)
3. REMOVE FRONT AXLE SHAFT NUT LH
4. SEPARATE TIE ROD ASSEMBLY LH
5. REMOVE FRONT STABILIZER LINK ASSEMBLY LH
|
(a) Remove the 2 nuts and front stabilizer link assembly LH. HINT: If the ball joint turns together with the nut, using a 6 mm hexagon wrench to hold the stud bolt. |
|
6. REMOVE FRONT STABILIZER LINK ASSEMBLY RH
HINT:
Perform the same procedure as the LH side.
7. SEPARATE FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY LH
8. SEPARATE FRONT DRIVE SHAFT ASSEMBLY LH
9. REMOVE FRONT NO. 1 STABILIZER BRACKET LH
|
(a) Remove the 2 bolts and front No. 1 stabilizer bracket LH from the front frame assembly. |
|
10. REMOVE FRONT NO. 1 STABILIZER BRACKET RH
HINT:
Perform the same procedure as the LH side.
11. REMOVE FRONT NO. 1 STABILIZER BAR BUSHING
(a) Remove the 2 front No. 1 stabilizer bar bushings from the front stabilizer bar.
12. REMOVE FRONT STABILIZER BAR
|
(a) Remove the front stabilizer bar from the left side of the vehicle. |
|
|
|