Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VISX |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 -
] |
Title: FRONT SUSPENSION: FRONT STABILIZER BAR(for AWD): REMOVAL; 2016 - 2020 MY Sienna [12/2015 - ] |
REMOVAL
PROCEDURE
1. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH
(See page
)
2. REMOVE EXHAUST MANIFOLD TO HEAD GASKET
(See page
)
3. REMOVE NO. 1 EXHAUST PIPE SUPPORT BRACKET
4. REMOVE FRONT EXHAUST PIPE ASSEMBLY
5. REMOVE FRONT STABILIZER LINK ASSEMBLY LH
(a) Remove the 2 nuts and front stabilizer link assembly LH.
HINT:
If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.
|
|
6. REMOVE FRONT STABILIZER LINK ASSEMBLY RH
HINT:
Perform the same procedure as the LH side.
7. REMOVE FRONT NO. 1 STABILIZER BRACKET LH
(a) Remove the 2 bolts and front No. 1 stabilizer bracket LH from the front frame assembly.
|
|
8. REMOVE FRONT NO. 1 STABILIZER BRACKET RH
HINT:
Perform the same procedure as the LH side.
9. REMOVE FRONT NO. 2 STABILIZER BRACKET LH
(a) Remove the front No. 2 stabilizer bracket LH from the front stabilizer bar bushing.
|
|
10. REMOVE FRONT NO. 2 STABILIZER BRACKET RH
HINT:
Perform the same procedure as the LH side.
11. REMOVE FRONT NO. 1 STABILIZER BAR BUSHING
(a) Remove the 2 front No. 1 stabilizer bar bushings from the front stabilizer bar.
12. REMOVE FRONT STABILIZER BAR
(a) Remove the front stabilizer bar from the left side of the vehicle.
|
|
|