| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VISE |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - ] |
| Title: AXLE AND DIFFERENTIAL: REAR AXLE HUB: ON-VEHICLE INSPECTION; 2016 - 2020 MY Sienna [12/2015 - ] | ||
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT REAR AXLE HUB BEARING LOOSENESS
|
(a) Using a dial indicator, check for looseness near the center of the axle hub. Maximum: 0.05 mm (0.0020 in.) If looseness exceeds the maximum, replace the axle hub assembly. NOTICE: Ensure that the dial indicator is set at right angles to the measurement surface. |
|
2. INSPECT REAR AXLE HUB RUNOUT
|
(a) Using a dial indicator, check for runout in the surface of the axle hub outside the hub bolt. Maximum: 0.07 mm (0.0027 in.) If runout exceeds the maximum, replace the axle hub assembly. NOTICE: Ensure that the dial indicator is set at right angles to the measurement surface. |
|
|
|