Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VIRZ |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 -
] |
Title: AXLE AND DIFFERENTIAL: DIFFERENTIAL OIL: REPLACEMENT; 2016 - 2020 MY Sienna [12/2015 - ] |
REPLACEMENT
PROCEDURE
1. REMOVE REAR DIFFERENTIAL FILLER PLUG
(a) Stop the vehicle in a level place.
(b) Using a hexagon wrench (10 mm), remove the rear differential filler plug and gasket.
|
|
2. REMOVE REAR DIFFERENTIAL DRAIN PLUG
(a) Using a hexagon wrench (10 mm), remove the rear differential drain plug and gasket, then drain the differential oil.
|
|
3. INSTALL REAR DIFFERENTIAL DRAIN PLUG
(a) Using a hexagon wrench (10 mm), install the rear differential drain plug with a new gasket.
Torque:
39 N·m {398 kgf·cm, 29 ft·lbf}
|
|
4. ADD DIFFERENTIAL OIL
(a) Add differential oil until the oil level is between 0 and 5 mm (0 and 0.197 in.) from the bottom lip of the rear differential filler plug opening.
Capacity:
0.5 to 0.6 liters (0.5 to 0.6 US qts, 0.4 to 0.5 Imp.qts)
Oil grade:
Toyota Genuine Differential Gear Oil LT 75W-85 GL-5 or equivalent
NOTICE:
-
An excessively large or small amount of differential oil may cause damage.
-
After adding differential oil, drive the vehicle and recheck the oil level.
|
|
5. INSPECT AND ADJUST DIFFERENTIAL OIL
(a) Check that the oil level is between 0 and 5 mm (0 and 0.197 in.) from the bottom lip of the rear differential filler plug opening.
NOTICE:
-
An excessively large or small amount of differential oil may cause damage.
-
After adding differential oil, drive the vehicle and recheck the oil level.
|
|
(b) Inspect for oil leak if the oil level is low.
6. INSTALL REAR DIFFERENTIAL FILLER PLUG
(a) Using a hexagon wrench (10 mm), install the rear differential filler plug and a new gasket.
Torque:
39 N·m {398 kgf·cm, 29 ft·lbf}
|
|
|