Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VIQQ |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 -
] |
Title: MF1A (TRANSFER / 4WD / AWD): TRANSFER ASSEMBLY(When Not Using the Engine Support Bridge): REMOVAL; 2016 - 2020 MY Sienna [12/2015 - ] |
REMOVAL
PROCEDURE
1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
(See page
)
2. REMOVE STARTER ASSEMBLY
3. REMOVE MANIFOLD STAY
4. DISCONNECT BREATHER PLUG HOSE
5. DISCONNECT ENGINE WIRE
6. REMOVE TRANSFER STIFFENER PLATE RH
(a) Remove the 4 bolts and transfer stiffener plate RH.
|
|
7. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY
8. REMOVE TORQUE CONVERTER CLUTCH ASSEMBLY
9. REMOVE TRANSFER ASSEMBLY
(b) Using a plastic hammer, remove the transfer from the automatic transaxle.
NOTICE:
-
Remove the transfer from the automatic transaxle without tilting it.
-
During removal, do not hold the transfer by the oil seals on either side of the assembly.
(c) Remove the 4 transfer and transaxle setting stud bolts.
|
|
|