Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VIQN |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 -
] |
Title: MF1A (TRANSFER / 4WD / AWD): TRANSFER ASSEMBLY(When Not Using the Engine Support Bridge): INSTALLATION; 2016 - 2020 MY Sienna [12/2015 - ] |
INSTALLATION
PROCEDURE
1. INSTALL TRANSFER ASSEMBLY
(a) Install the 4 new transfer and transaxle setting stud bolts onto the automatic transaxle positions shown in the illustration.
Torque:
39 N·m {400 kgf·cm, 29 ft·lbf}
NOTICE:
Install the sealed side of the stud bolt onto the automatic transaxle.
Text in Illustration
*1
|
Stud Bolt A
|
*2
|
Stud Bolt B
|
*a
|
Stud Bolt A Position
|
*b
|
Stud Bolt B Position
|
*c
|
22 mm (0.866 in.)
|
*d
|
25 mm (0.984 in.)
|
*e
|
5 mm (0.197 in.)
|
-
|
-
|
(b) Install the transfer onto the automatic transaxle with the 8 nuts.
Torque:
69 N·m {700 kgf·cm, 51 ft·lbf}
NOTICE:
-
Install the transfer to the automatic transaxle horizontally.
-
Do not touch the transfer oil seals during installation.
2. INSTALL TORQUE CONVERTER CLUTCH ASSEMBLY
3. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY
4. INSTALL TRANSFER STIFFENER PLATE RH
(a) Install the transfer stiffener plate RH with the 4 bolts.
Torque:
Bolt A :
34 N·m {347 kgf·cm, 25 ft·lbf}
Bolt B :
78 N·m {795 kgf·cm, 58 ft·lbf}
|
|
5. CONNECT ENGINE WIRE
6. CONNECT BREATHER PLUG HOSE
7. INSTALL MANIFOLD STAY
8. INSTALL STARTER ASSEMBLY
9. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE
(See page
)
|