Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VIQF |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 -
] |
Title: MF1A (TRANSFER / 4WD / AWD): TRANSFER OIL: REPLACEMENT; 2016 - 2020 MY Sienna [12/2015 - ] |
REPLACEMENT
PROCEDURE
1. DRAIN TRANSFER OIL
(a) Stop the vehicle in a level place.
|
|
(b) Remove the No. 1 transfer case plug and gasket.
Text in Illustration
*1
|
No. 1 Transfer Case Plug
|
*2
|
Transfer Drain Plug
|
(c) Remove the transfer drain plug and gasket, and then drain the transfer oil.
(d) Install a new gasket and the transfer drain plug.
Torque:
49 N·m {500 kgf·cm, 36 ft·lbf}
2. ADD TRANSFER OIL
(a) Add transfer oil surface is within 5 mm (0.196 in.) of the bottom of the No. 1 transfer case plug opening.
Oil Type
|
Oil Capacity (Reference)
|
Toyota Genuine Differential gear oil LT 75W-85 GL-5 or equivalent
|
0.8 liters (0.8 US qts, 0.7 Imp. qts)
|
|
|
(b) Install a new gasket and the No. 1 transfer case plug.
Torque:
49 N·m {500 kgf·cm, 36 ft·lbf}
3. DRIVE TEST
4. INSPECT TRANSFER OIL
5. INSPECT FOR OIL LEAK
|