Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VIP6
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 - 08/2016]
Title: U660F (AUTOMATIC TRANSMISSION / TRANSAXLE): TCM: REMOVAL; 2016 MY Sienna [12/2015 - 08/2016]

REMOVAL

CAUTION / NOTICE / HINT

NOTICE:

If automatic transaxle parts are replaced, refer to Parts Replacement Compensation Table to determine if any additional operations are necessary (See page 2016 MY Sienna [12/2015 - 08/2016]; U660E (AUTOMATIC TRANSMISSION / TRANSAXLE): AUTOMATIC TRANSAXLE SYSTEM: PRECAUTION ).

PROCEDURE

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

(a) When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page 2016 MY Sienna [12/2015 - 08/2016]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION ).

2. REMOVE AIR CLEANER INLET ASSEMBLY

2016 MY Sienna [12/2015 - 08/2016]; 2GR-FE ENGINE MECHANICAL: ENGINE ASSEMBLY: REMOVAL+

3. REMOVE BATTERY

2016 MY Sienna [12/2015 - 08/2016]; 2GR-FE ENGINE MECHANICAL: ENGINE ASSEMBLY: REMOVAL+

4. REMOVE TCM

(a) Turn the lock lever and disconnect the connector from the TCM.

Text in Illustration

*1

Lock Lever

(b) Remove the 2 bolts and TCM from the automatic transaxle.