Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VINP |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 - 08/2016] |
Title: U660F (AUTOMATIC TRANSMISSION / TRANSAXLE): DIFFERENTIAL OIL SEAL(for LH Side): REPLACEMENT; 2016 MY Sienna [12/2015 - 08/2016] |
REPLACEMENT
PROCEDURE
1. DRAIN AUTOMATIC TRANSAXLE FLUID
(a) Remove the bolt, 2 clips and front fender apron seal LH.
(b) Remove the refill plug and gasket from the automatic transaxle.
|
|
(c) Using a 6 mm hexagon socket wrench, remove the overflow plug and gasket from the automatic transaxle.
|
|
(d) Using a 6 mm hexagon socket wrench, remove the No. 1 transmission oil filler tube from the automatic transaxle.
Text in Illustration
*1
|
No. 1 Transmission Oil Filler Tube
|
|
|
(e) Drain automatic transaxle fluid from the automatic transaxle.
(f) Using a 6 mm hexagon socket wrench, install the No. 1 transmission oil filler tube into the automatic transaxle.
Text in Illustration
*1
|
No. 1 Transmission Oil Filler Tube
|
Torque:
1.7 N·m {17 kgf·cm, 15 in·lbf}
|
|
(g) Using a 6 mm hexagon socket wrench, temporarily install the gasket and the overflow plug into the automatic transaxle.
HINT:
Reuse the old gasket. The overflow plug will be removed again to adjust the fluid level.
|
|
(h) Temporarily install the gasket and the refill plug into the automatic transaxle.
HINT:
Reuse the old gasket. The refill plug will be removed again to adjust the fluid level.
|
|
2. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH
(See page
)
3. REMOVE TRANSAXLE CASE OIL SEAL
(a) Using SST, tap out the transaxle case oil seal.
SST: 09308-00010
|
|
4. INSTALL TRANSAXLE CASE OIL SEAL
(a) Using SST and a hammer, tap in a new transaxle case oil seal.
SST: 09316-10010
SST: 09950-70010
09951-07100
Oil seal driven in depth:
-0.5 to 0.5 mm (-0.0197 to 0.0197 in.)
NOTICE:
Check that the oil seal is installed in the correct direction.
|
|
(b) Coat the lip of the transaxle case oil seal with MP grease.
5. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH
(See page
)
|