Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VIIJ
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 -           ]
Title: CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: INSTALLATION; 2016 - 2020 MY Sienna [12/2015 -        ]

INSTALLATION

PROCEDURE

1. INSTALL CRUISE CONTROL MAIN SWITCH

(a) Install the cruise control main switch with the 2 screws.

(b) Connect the connector.

2. INSTALL STEERING PAD

(See page 2016 - 2020 MY Sienna [12/2015 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: STEERING PAD: INSTALLATION+ )

3. INSTALL LOWER NO. 3 STEERING WHEEL COVER

(See page 2016 - 2020 MY Sienna [12/2015 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: STEERING PAD: INSTALLATION+ )

4. INSTALL LOWER NO. 2 STEERING WHEEL COVER

(See page 2016 - 2020 MY Sienna [12/2015 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: STEERING PAD: INSTALLATION+ )

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:

5.4 N·m {55 kgf·cm, 48 in·lbf}

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page 2016 MY Sienna [12/2015 - 08/2016]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION 2017 MY Sienna [08/2016 - 11/2017]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION 2018 - 2020 MY Sienna [11/2017 -        ]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION ).

6. INSPECT STEERING PAD

(See page 2016 - 2020 MY Sienna [12/2015 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: STEERING PAD: INSTALLATION+ )

7. INSPECT SRS WARNING LIGHT

(See page 2016 - 2020 MY Sienna [12/2015 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: CHECK MODE PROCEDURE )