Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VIGU |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 - 08/2016] |
Title: 2GR-FE STARTING: ENGINE SWITCH: REMOVAL; 2016 MY Sienna [12/2015 - 08/2016] |
REMOVAL
PROCEDURE
1. REMOVE CONSOLE BOX ASSEMBLY (for Slide Type)
2. REMOVE CONSOLE BOX ASSEMBLY (for Fixed Type)
3. REMOVE DOOR SCUFF PLATE ASSEMBLY RH
4. REMOVE DOOR SCUFF PLATE ASSEMBLY LH
HINT:
Use the same procedure as for the RH side.
5. REMOVE COWL SIDE TRIM BOARD RH
6. REMOVE COWL SIDE TRIM BOARD LH
HINT:
Use the same procedure as for the RH side.
7. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
8. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
HINT:
Use the same procedure as for the RH side.
9. REMOVE NO. 1 INSTRUMENT PANEL LOWER FINISH PANEL
10. REMOVE NO. 2 SWITCH HOLE BASE
11. REMOVE NO. 1 SWITCH HOLE BASE
12. REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY
13. REMOVE INSTRUMENT PANEL FINISH PANEL END RH
14. REMOVE INSTRUMENT PANEL FINISH PANEL END LH
HINT:
Use the same procedure as for the RH side.
15. REMOVE INSTRUMENT LOWER CENTER COVER (w/o Front Console Box)
16. REMOVE INSTRUMENT LOWER CENTER COVER (w/ Front Console Box)
17. REMOVE INSTRUMENT CLUSTER FINISH LOWER CENTER PANEL SUB-ASSEMBLY
18. REMOVE BOX BOTTOM MAT
19. REMOVE INSTRUMENT CLUSTER FINISH CENTER PANEL ASSEMBLY
20. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
21. REMOVE ENGINE SWITCH
(a) Disengage the 2 claws to remove the engine switch from the lower instrument panel finish panel assembly.
|
|
|