Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VIEK |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 - 08/2016] |
Title: 2GR-FE EMISSION CONTROL: PURGE VALVE: INSPECTION; 2016 MY Sienna [12/2015 - 08/2016] |
INSPECTION
PROCEDURE
1. INSPECT PURGE VSV
(a) Measure the resistance according to the value(s) in the table below.
Text in Illustration
*a
|
Component without harness connected
(Purge VSV)
|
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
1 - 2
|
20°C (68°F)
|
23 to 26 Ω
|
If the result is not as specified, replace the purge VSV.
|
|
(b) Check operation of the purge VSV.
(1) Check that air does not flow from port E to port F.
Text in Illustration
*1
|
Port F
|
*2
|
Port E
|
*a
|
Air
|
|
|
(2) Apply battery voltage across the terminals.
Text in Illustration
*1
|
Port F
|
*2
|
Port E
|
*a
|
Component without harness connected
(Purge VSV)
|
*b
|
Air
|
|
|
(3) Check that air flows from port E to port F.
If the result is not as specified, replace the purge VSV.
|