Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VIEF |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 - 08/2016] |
Title: 2GR-FE EMISSION CONTROL: CANISTER: INSTALLATION; 2016 MY Sienna [12/2015 - 08/2016] |
INSTALLATION
PROCEDURE
1. INSTALL CHARCOAL CANISTER LEAK DETECTION PUMP SUB-ASSEMBLY
(a) Engage the 2 claws to install a new charcoal canister leak detection pump sub-assembly to the canister.
NOTICE:
-
Do not allow foreign matter such as grease, oil or water to adhere to the O-rings.
-
Ensure that the claws are engaged properly.
2. INSTALL CHARCOAL CANISTER ASSEMBLY
(a) Engage the hook.
(b) Install the charcoal canister assembly with the 3 bolts and clip.
Torque:
29 N·m {296 kgf·cm, 21 ft·lbf}
(c) Connect the fuel emission hose and connector.
3. CONNECT CHARCOAL CANISTER OUTLET TUBE SUB-ASSEMBLY
(a) Connect the charcoal canister outlet tube (See page
).
NOTICE:
-
Check that there are no scratches or foreign objects on the connecting part.
-
Check that the charcoal canister outlet tube is inserted securely.
-
Check that the charcoal canister outlet tube is securely connected by pulling on it.
|
|
4. CONNECT FUEL TANK VENT HOSE
(a) Connect the fuel tank vent hose and lock it by pushing in the retainer as shown in the illustration.
Text in Illustration
NOTICE:
-
Check that there are no scratches or foreign objects on the connecting part.
-
Check that the fuel tank vent hose is inserted securely.
-
After installing the retainer, check that the fuel tank vent hose is securely connected by pulling on it.
HINT:
-
Insert the inlet tube until a "click" sound is heard.
-
The quick connector cannot be locked when the tube is not inserted securely.
|
|
5. INSTALL CHARCOAL CANISTER PROTECTOR
(a) Engage the 4 claws.
(b) Install the charcoal canister protector with the 6 bolts.
Torque:
5.0 N·m {51 kgf·cm, 44 in·lbf}
|