Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VIDZ
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 - 08/2016]
Title: 2GR-FE FUEL: FUEL SENDER GAUGE ASSEMBLY: INSPECTION; 2016 MY Sienna [12/2015 - 08/2016]

INSPECTION

PROCEDURE

1. INSPECT FUEL SENDER GAUGE ASSEMBLY

(a) Check the fuel sender gauge resistance.

Text in Illustration

*a

Component without harness connected

(Fuel Sender Gauge Assembly)

-

-

(b) Check that the float moves smoothly between the F level (upper end) and E level (lower end).

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Float Level

Float Position (mm (in.))

Specified Condition

1 - 2

F

114.2 (4.496)

13.5 to 16.5 Ω

1/2

66.1 (2.602)

202 to 223 Ω

E

0 (0)

405.5 to 414.5 Ω

If the result is not as specified, replace the fuel sender gauge assembly.