Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VIDI |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 - 08/2016] |
Title: 2GR-FE ENGINE MECHANICAL: REAR CRANKSHAFT OIL SEAL: REMOVAL; 2016 MY Sienna [12/2015 - 08/2016] |
REMOVAL
PROCEDURE
1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY (for 2WD)
(See page
)
2. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY (for AWD)
(See page
)
3. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY
(a) Using SST, hold the crankshaft pulley.
SST: 09213-70011
09213-70020
SST: 09330-00021
|
|
(b) Remove the 8 bolts, front drive plate spacer, drive plate and ring gear sub-assembly and rear drive plate spacer.
|
|
4. REMOVE ENGINE REAR OIL SEAL
(a) Using a knife, cut off the engine rear oil seal lip.
Text in Illustration
*1
|
Protective Tape
|
*a
|
Cut Position
|
|
|
(b) Using a screwdriver, pry out the engine rear oil seal.
NOTICE:
Be careful not to damage the crankshaft.
HINT:
Tape the screwdriver tip before use.
|