Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VIDI
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 - 08/2016]
Title: 2GR-FE ENGINE MECHANICAL: REAR CRANKSHAFT OIL SEAL: REMOVAL; 2016 MY Sienna [12/2015 - 08/2016]

REMOVAL

PROCEDURE

1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY (for 2WD)

(See page 2016 MY Sienna [12/2015 - 08/2016]; U660E (AUTOMATIC TRANSMISSION / TRANSAXLE): AUTOMATIC TRANSAXLE ASSEMBLY(When Not Using the Engine Support Bridge): REMOVAL )

2. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY (for AWD)

(See page 2016 MY Sienna [12/2015 - 08/2016]; U660F (AUTOMATIC TRANSMISSION / TRANSAXLE): AUTOMATIC TRANSAXLE ASSEMBLY(When Not Using the Engine Support Bridge): REMOVAL )

3. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY

(a) Using SST, hold the crankshaft pulley.

SST: 09213-70011

09213-70020

SST: 09330-00021

(b) Remove the 8 bolts, front drive plate spacer, drive plate and ring gear sub-assembly and rear drive plate spacer.

4. REMOVE ENGINE REAR OIL SEAL

(a) Using a knife, cut off the engine rear oil seal lip.

Text in Illustration

*1

Protective Tape

*a

Cut Position

(b) Using a screwdriver, pry out the engine rear oil seal.

NOTICE:

Be careful not to damage the crankshaft.

HINT:

Tape the screwdriver tip before use.