Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VIDF |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 - 08/2016] |
Title: 2GR-FE ENGINE MECHANICAL: FRONT CRANKSHAFT OIL SEAL: REMOVAL; 2016 MY Sienna [12/2015 - 08/2016] |
REMOVAL
PROCEDURE
1. REMOVE FRONT WHEEL RH
2. REMOVE FRONT FENDER APRON SEAL RH
3. REMOVE FAN AND GENERATOR V BELT
4. REMOVE CRANKSHAFT PULLEY
(a) Using SST, loosen the crankshaft pulley bolt.
SST: 09213-70011
09213-70020
SST: 09330-00021
Text in Illustration
*a
|
Hold
|
|
Turn
|
(b) Using SST, remove the crankshaft pulley bolt and crankshaft pulley.
SST: 09950-50013
09951-05010
09952-05010
09953-05020
09954-05021
Text in Illustration
*a
|
Hold
|
|
Turn
|
(c) Remove the pulley set key from the crankshaft.
|
|
5. REMOVE TIMING CHAIN CASE OIL SEAL
(a) Using a knife, cut off the timing chain case oil seal lip.
Text in Illustration
*1
|
Protective Tape
|
*a
|
Cut Position
|
|
|
(b) Using a screwdriver, pry out the timing chain case oil seal.
NOTICE:
After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.
HINT:
Tape the screwdriver tip before use.
|