Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VIDF
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 - 08/2016]
Title: 2GR-FE ENGINE MECHANICAL: FRONT CRANKSHAFT OIL SEAL: REMOVAL; 2016 MY Sienna [12/2015 - 08/2016]

REMOVAL

PROCEDURE

1. REMOVE FRONT WHEEL RH

2. REMOVE FRONT FENDER APRON SEAL RH

2016 MY Sienna [12/2015 - 08/2016]; 2GR-FE ENGINE MECHANICAL: ENGINE ASSEMBLY: REMOVAL+

3. REMOVE FAN AND GENERATOR V BELT

2016 MY Sienna [12/2015 - 08/2016]; 2GR-FE ENGINE MECHANICAL: DRIVE BELT: REMOVAL+

4. REMOVE CRANKSHAFT PULLEY

(a) Using SST, loosen the crankshaft pulley bolt.

SST: 09213-70011

09213-70020

SST: 09330-00021

Text in Illustration

*a

Hold

Turn

(b) Using SST, remove the crankshaft pulley bolt and crankshaft pulley.

SST: 09950-50013

09951-05010

09952-05010

09953-05020

09954-05021

Text in Illustration

*a

Hold

Turn

(c) Remove the pulley set key from the crankshaft.

5. REMOVE TIMING CHAIN CASE OIL SEAL

(a) Using a knife, cut off the timing chain case oil seal lip.

Text in Illustration

*1

Protective Tape

*a

Cut Position

(b) Using a screwdriver, pry out the timing chain case oil seal.

NOTICE:

After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.

HINT:

Tape the screwdriver tip before use.