Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VIDD
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 - 08/2016]
Title: 2GR-FE ENGINE MECHANICAL: FRONT CRANKSHAFT OIL SEAL: INSTALLATION; 2016 MY Sienna [12/2015 - 08/2016]

INSTALLATION

PROCEDURE

1. INSTALL TIMING CHAIN CASE OIL SEAL

(a) Apply MP grease to a new timing chain case oil seal lip.

(b) Using SST and a hammer, tap in the timing chain case oil seal until its surface is flush with the timing chain cover edge.

Text in Illustration

*a

Oil seal tap in depth

(0 to 1.0 mm)

SST: 09223-22010

SST: 09506-35010

Oil seal tap in depth:

0 to 1.0 mm (0 to 0.0393 in.)

NOTICE:

  • Keep the lip free of foreign matter.
  • Do not tap the timing chain case oil seal at an angle.

2. INSTALL CRANKSHAFT PULLEY

(a) Align the pulley set key with the key groove of the pulley, and slide on the pulley.

(b) Using SST, install the pulley bolt.

SST: 09213-70011

09213-70020

SST: 09330-00021

Torque:

250 N·m {2550 kgf·cm, 184 ft·lbf}

Text in Illustration

*a

Hold

Turn

3. INSTALL FAN AND GENERATOR V BELT

2016 MY Sienna [12/2015 - 08/2016]; 2GR-FE ENGINE MECHANICAL: DRIVE BELT: INSTALLATION+

4. INSTALL FRONT FENDER APRON SEAL RH

5. INSTALL FRONT WHEEL RH

Torque:

103 N·m {1050 kgf·cm, 76 ft·lbf}