Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VICL
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 - 08/2016]
Title: 2GR-FE ENGINE MECHANICAL: DRIVE BELT: INSTALLATION; 2016 MY Sienna [12/2015 - 08/2016]

INSTALLATION

PROCEDURE

1. INSTALL FAN AND GENERATOR V BELT

(a) Install the fan and generator V belt.

Text in Illustration

*1

Water Pump

*2

Idler

*3

Generator

*4

Crankshaft

*5

Tensioner

*6

A/C Compressor

(b) Turn the V-ribbed belt tensioner counterclockwise and remove the 5 mm hexagon wrench.

(c) After installing the fan and generator V belt, check that it fits properly in the ribbed grooves. Confirm that the belt has not slipped out of the grooves on the bottom of the crank pulley by hand.

2. INSTALL FRONT FENDER APRON SEAL RH

2016 MY Sienna [12/2015 - 08/2016]; 2GR-FE ENGINE MECHANICAL: ENGINE ASSEMBLY: INSTALLATION+

3. INSTALL FRONT WHEEL RH

Torque:

103 N·m {1050 kgf·cm, 76 ft·lbf}