Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VI9A
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 - 08/2016]
Title: 2GR-FE (ENGINE CONTROL): KNOCK SENSOR: INSPECTION; 2016 MY Sienna [12/2015 - 08/2016]

INSPECTION

PROCEDURE

1. INSPECT KNOCK SENSOR

(a) Measure the resistance according to the value(s) in the table below.

Text in Illustration

*a

Component without harness connected

(Knock Sensor)

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 (Ground) - 2 (Output)

20°C (68°F)

120 to 280 kΩ

If the result is not as specified, replace the knock sensor.