Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VI99
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 - 08/2016]
Title: 2GR-FE (ENGINE CONTROL): KNOCK SENSOR: INSTALLATION; 2016 MY Sienna [12/2015 - 08/2016]

INSTALLATION

PROCEDURE

1. INSTALL KNOCK SENSOR

(a) Install the 2 knock sensors with the 2 bolts as shown in the illustration.

Text in Illustration

*a

for Bank 1

*b

for Bank 2

*c

RH

*d

Rear

*e

Front

Torque:

20 N·m {204 kgf·cm, 15 ft·lbf}

NOTICE:

Make sure that each knock control sensor is in the correct position.

(b) Connect the 2 knock sensor connectors.

2. INSTALL INTAKE MANIFOLD

(See page 2016 MY Sienna [12/2015 - 08/2016]; 2GR-FE INTAKE / EXHAUST: INTAKE MANIFOLD: INSTALLATION )