Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VI96 |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 - 08/2016] |
Title: 2GR-FE (ENGINE CONTROL): ENGINE COOLANT TEMPERATURE SENSOR: INSPECTION; 2016 MY Sienna [12/2015 - 08/2016] |
INSPECTION
PROCEDURE
1. INSPECT ENGINE COOLANT TEMPERATURE SENSOR
Text in Illustration
*a
|
Component without harness connected
(Engine Coolant Temperature Sensor)
|
*b
|
Resistance kΩ
|
*c
|
Temperature °C (°F)
|
*d
|
Acceptable
|
(a) Partially immerse the sensor in water and warm up the water.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
1 - 2
|
Approx. 20°C (68°F)
|
2.32 to 2.59 kΩ
|
Approx. 80°C (176°F)
|
0.310 to 0.326 kΩ
|
NOTICE:
When checking the sensor in water, keep the terminals dry. After the check, wipe the sensor dry.
If the result is not as specified, replace the sensor.
|