| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VI96 |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - 08/2016] |
| Title: 2GR-FE (ENGINE CONTROL): ENGINE COOLANT TEMPERATURE SENSOR: INSPECTION; 2016 MY Sienna [12/2015 - 08/2016] | ||
INSPECTION
PROCEDURE
1. INSPECT ENGINE COOLANT TEMPERATURE SENSOR
Text in Illustration
|
*a |
Component without harness connected (Engine Coolant Temperature Sensor) |
*b |
Resistance kΩ |
|
*c |
Temperature °C (°F) |
*d |
Acceptable |
(a) Partially immerse the sensor in water and warm up the water.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
1 - 2 |
Approx. 20°C (68°F) |
2.32 to 2.59 kΩ |
|
Approx. 80°C (176°F) |
0.310 to 0.326 kΩ |
NOTICE:
When checking the sensor in water, keep the terminals dry. After the check, wipe the sensor dry.
If the result is not as specified, replace the sensor.
|
|