| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VI95 |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - 08/2016] |
| Title: 2GR-FE (ENGINE CONTROL): ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION; 2016 MY Sienna [12/2015 - 08/2016] | ||
INSTALLATION
PROCEDURE
1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR
|
(a) Install a new gasket onto the engine coolant temperature sensor. Text in Illustration
|
|
(b) Using a 19 mm deep socket wrench, install the engine coolant temperature sensor.
Torque:
20 N·m {200 kgf·cm, 14 ft·lbf}
(c) Connect the engine coolant temperature sensor connector.
2. ADD ENGINE COOLANT
![2016 MY Sienna [12/2015 - 08/2016]; 2GR-FE COOLING: COOLANT: REPLACEMENT+](/t3Portal/stylegraphics/info.gif)
3. INSPECT FOR COOLANT LEAK
4. INSTALL AIR CLEANER AND HOSE
5. INSTALL AIR CLEANER INLET COVER ASSEMBLY SEAL
6. INSTALL FRONT OUTER COWL TOP PANEL SUB-ASSEMBLY
7. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
(See page
)
8. INSTALL NO. 1 ENGINE UNDER COVER
9. INSTALL V-BANK COVER SUB-ASSEMBLY
|
|