(a) Measure the resistance according to the value(s) in the table below.
Text in Illustration
*a
|
Component without harness connected
(Crankshaft Position Sensor)
|
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
1 - 2
|
Cold
|
1630 to 2740 Ω
|
Hot
|
2065 to 3225 Ω
|
HINT:
In the table above, the terms "Cold" and "Hot" refer to the temperature of the coils. Cold means approximately -10 to 50°C (14 to 122°F). Hot means approximately 50 to 100°C (122 to 212°F).
If the resistance is not as specified, replace the crankshaft position sensor.
|