Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VI8Y
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 - 08/2016]
Title: 2GR-FE (ENGINE CONTROL): CRANKSHAFT POSITION SENSOR: INSTALLATION; 2016 MY Sienna [12/2015 - 08/2016]

INSTALLATION

PROCEDURE

1. INSTALL CRANKSHAFT POSITION SENSOR

(a) Apply a light coat of engine oil to the O-ring on the crankshaft position sensor.

Text in Illustration

*1

O-ring

NOTICE:

  • When reusing the sensor, inspect the O-ring.
  • If the O-ring has scratches or cuts, replace the crankshaft position sensor.

(b) Install the crank position sensor with the bolt.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

(c) Connect the crank position sensor connector.

2. INSTALL W/PULLEY COMPRESSOR ASSEMBLY

(See page 2016 - 2020 MY Sienna [12/2015 -        ]; HEATING / AIR CONDITIONING: COMPRESSOR: INSTALLATION )