| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VI8X |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - 08/2016] |
| Title: 2GR-FE (ENGINE CONTROL): CAMSHAFT POSITION SENSOR: REMOVAL; 2016 MY Sienna [12/2015 - 08/2016] | ||
REMOVAL
PROCEDURE
1. REMOVE INTAKE AIR SURGE TANK ASSEMBLY
(See page
![2016 MY Sienna [12/2015 - 08/2016]; 2GR-FE INTAKE / EXHAUST: INTAKE MANIFOLD: REMOVAL](/t3Portal/stylegraphics/info.gif)
)
2. REMOVE VVT SENSOR (for Intake Side of Bank 1)
|
(a) Disconnect the sensor connector. |
|
(b) Remove the bolt and the sensor.
3. REMOVE VVT SENSOR (for Exhaust Side of Bank 1)
|
(a) Disconnect the sensor connector. |
|
(b) Remove the bolt and the sensor.
4. REMOVE VVT SENSOR (for Intake Side of Bank 2)
|
(a) Disconnect the sensor connector. |
|
(b) Remove the bolt and the sensor.
5. REMOVE VVT SENSOR (for Exhaust Side of Bank 2)
|
(a) Disconnect the sensor connector. |
|
(b) Remove the bolt and the sensor.
|
|