Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000VI8L |
Model Year Start: 2016 |
Model: Sienna |
Prod Date Range: [12/2015 - 08/2016] |
Title: 2GR-FE (ENGINE CONTROL): ECM: REMOVAL; 2016 MY Sienna [12/2015 - 08/2016] |
REMOVAL
CAUTION / NOTICE / HINT
NOTICE:
Perform the Vehicle Identification Number (VIN) registration when replacing the ECM (See page
).
PROCEDURE
1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
(See page
)
2. REMOVE FRONT OUTER COWL TOP PANEL SUB-ASSEMBLY
3. REMOVE AIR CLEANER INLET COVER ASSEMBLY SEAL
4. REMOVE AIR CLEANER AND HOSE
5. REMOVE ECM
(a) While slightly pushing portion A of the lever of the ECM connector, turn the lever until it makes a click sound.
|
|
(b) Disconnect the 2 ECM connectors.
NOTICE:
After disconnecting the connectors, make sure that dirt, water or other foreign matter does not contact the connecting part of the connectors.
(c) Remove the 3 bolts and the ECM with the brackets.
|
|
6. REMOVE ECM BRACKET
(a) Remove the 2 screws and the ECM bracket.
|
|
7. REMOVE NO. 2 ECM BRACKET
(a) Remove the 3 screws and the No. 2 ECM bracket.
|
|
|