Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VI8A
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 - 08/2016]
Title: 2GR-FE (ENGINE CONTROL): CAMSHAFT OIL CONTROL VALVE: ON-VEHICLE INSPECTION; 2016 MY Sienna [12/2015 - 08/2016]

ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

(a) Connect the Techstream to the DLC3.

(b) Start the engine.

(c) Turn the Techstream on.

(d) Inspect the oil control valve (for intake camshaft).

(1) Enter the following menus: Powertrain / Engine / Active Test / Control the VVT System (Bank 1).

(2) Check the engine speed when the oil control valve is operated using the Techstream with the engine coolant temperature at 50°C (122°F) or less.

HINT:

  • When performing the Active Test, the air conditioning should be on.
  • Engine coolant temperature when the engine is started should be 30°C (86°F) or less.

OK:

Control Range

Specified Condition

OFF

Normal engine speed

ON

Rough idle or engine stalls (soon after oil control valve switched from OFF to ON)

If the operation is not as specified, check the oil control valve, wire harness and ECM.

(3) Enter the following menus: Powertrain / Engine / Active Test / Control the VVT System (Bank 2).

(4) Check the engine speed when the oil control valve is operated using the Techstream with the engine coolant temperature at 50°C (122°F) or less.

HINT:

  • When performing the Active Test, the air conditioning should be on.
  • Engine coolant temperature when the engine is started should be 30°C (86°F) or less.

OK:

Control Range

Specified Condition

OFF

Normal engine speed

ON

Rough idle or engine stalls (soon after oil control valve switched from OFF to ON)

If the operation is not as specified, check the oil control valve, wire harness and ECM.

(e) Inspect the oil control valve (for exhaust camshaft).

(1) Enter the following menus: Powertrain / Engine / Active Test / Control the VVT Exhaust Linear (Bank 1).

(2) Check the engine speed when the oil control valve is operated using the Techstream with the engine coolant temperature at 50°C (122°F) or less.

HINT:

  • When performing the Active Test, the air conditioning should be on.
  • Engine coolant temperature when the engine is started should be 30°C (86°F) or less.

OK:

Control Range

Specified Condition

-100%

Normal engine speed

100%

Rough idle or engine stalls (soon after oil control valve switched to 100%)

If the operation is not as specified, check the oil control valve, wire harness and ECM.

(3) Enter the following menus: Powertrain / Engine / Active Test / Control the VVT Exhaust Linear (Bank 2).

(4) Check the engine speed when the oil control valve is operated using the Techstream with the engine coolant temperature at 50°C (122°F) or less.

HINT:

  • When performing the Active Test, the air conditioning should be on.
  • Engine coolant temperature when the engine is started should be 30°C (86°F) or less.

OK:

Control Range

Specified Condition

-100%

Normal engine speed

100%

Rough idle or engine stalls (soon after oil control valve switched to 100%)

If the operation is not as specified, check the oil control valve, wire harness and ECM.