| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000VI89 |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - 08/2016] |
| Title: 2GR-FE (ENGINE CONTROL): CAMSHAFT OIL CONTROL VALVE: REMOVAL; 2016 MY Sienna [12/2015 - 08/2016] | ||
REMOVAL
PROCEDURE
1. REMOVE INTAKE AIR SURGE TANK ASSEMBLY
(See page
![2016 MY Sienna [12/2015 - 08/2016]; 2GR-FE INTAKE / EXHAUST: INTAKE MANIFOLD: REMOVAL](/t3Portal/stylegraphics/info.gif)
)
2. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side of Bank 1)
|
(a) Disconnect the oil control valve connector. |
|
(b) Remove the bolt and oil control valve.
(c) Remove the O-ring from the oil control valve.
3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side of Bank 2)
|
(a) Disengage the 2 clamps. |
|
|
(b) Disconnect the oil control valve connector. |
|
(c) Remove the bolt and oil control valve.
(d) Remove the O-ring from the oil control valve.
4. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side of Bank 1)
|
(a) Disengage the wire harness clamp. |
|
(b) Disconnect the oil control valve connector.
(c) Remove the bolt and oil control valve.
(d) Remove the O-ring from the oil control valve.
5. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side of Bank 2)
|
(a) Disconnect the oil control valve connector. |
|
(b) Remove the bolt and oil control valve.
(c) Remove the O-ring from the oil control valve.
|
|