Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VI89
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 - 08/2016]
Title: 2GR-FE (ENGINE CONTROL): CAMSHAFT OIL CONTROL VALVE: REMOVAL; 2016 MY Sienna [12/2015 - 08/2016]

REMOVAL

PROCEDURE

1. REMOVE INTAKE AIR SURGE TANK ASSEMBLY

(See page 2016 MY Sienna [12/2015 - 08/2016]; 2GR-FE INTAKE / EXHAUST: INTAKE MANIFOLD: REMOVAL )

2. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side of Bank 1)

(a) Disconnect the oil control valve connector.

(b) Remove the bolt and oil control valve.

(c) Remove the O-ring from the oil control valve.

3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side of Bank 2)

(a) Disengage the 2 clamps.

(b) Disconnect the oil control valve connector.

(c) Remove the bolt and oil control valve.

(d) Remove the O-ring from the oil control valve.

4. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side of Bank 1)

(a) Disengage the wire harness clamp.

(b) Disconnect the oil control valve connector.

(c) Remove the bolt and oil control valve.

(d) Remove the O-ring from the oil control valve.

5. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side of Bank 2)

(a) Disconnect the oil control valve connector.

(b) Remove the bolt and oil control valve.

(c) Remove the O-ring from the oil control valve.