Mode Valve Position Switch Replacement

Removal Procedure


    Object ID: 4489058
  1. Remove the control valve body cover (1) from the transmission. Control Valve Body Cover Replacement
  2. Front Bumper Fascia»Remove—Front Bumper Fascia Removal and Installation

    3. Object ID: 4493880
  3. Remove the control valve body (1) from the transmission. Control Valve Body Assembly Removal

    4. Object ID: 6054592
  4. Remove the control valve solenoid body bolt (1) from the control valve body assembly.
  5. Remove the mode valve position switch (2) from the control valve body assembly.

    6. Note: The mode valve position switch magnet is not replaceable. If the magnet must be replaced, the control valve body assembly will need to be replaced.

  6. Remove the mode valve position switch magnet (3) from the control valve body assembly.
  7. Clean and inspect the mode valve position switch magnet (3). Control Valve Body Cleaning and Inspection

Installation Procedure


    Object ID: 6054592

    Note: The mode valve position switch magnet is not replaceable. If the magnet must be replaced, the control valve body assembly will need to be replaced.

  1. Install the mode valve position switch magnet (3) to the control valve body assembly.
  2. Install the mode valve position switch (2) to the control valve body assembly.
  3. Install and tighten the control valve solenoid body bolt (1) to the control valve body assembly.Control Valve Body Assembly Assemble

    4. Object ID: 4493880
  4. Install the control valve body (1) to the transmission. Control Valve Body Assembly Installation
  5. Front Bumper Fascia»Install—Front Bumper Fascia Removal and Installation

    6. Object ID: 4489058
  6. Install the control valve body cover (1) to the transmission. Control Valve Body Cover Replacement
  7. Perform the transmission service fast learn procedure. Transmission Service Fast Learn Procedure