Serial Data Gateway Module Replacement (Terrain with M3U, M3D, or M3H)

Removal Procedure


    Object ID: 4692425
  1. Remove the left and right instrument panel center trim plate applique (1, 2).Instrument Panel Center Trim Plate Applique Replacement

    2. Object ID: 4693229
  2. Instrument Panel Trim Pad - Right Side(1)»Remove—Instrument Panel Trim Pad Replacement - Right Side

    3. Object ID: 4702538
  3. Radio Control Assembly(2)»Remove—Radio Control Assembly Replacement

    4. Object ID: 5744844
  4. Disconnect the electrical connectors.
  5. Serial Data Gateway Module Bracket Bolt(1)»Remove[2x]
  6. Serial Data Gateway Bracket(2)»Remove

    7. Object ID: 5834490
  7. Using a suitable plastic trim tool, release the retaining tab.
  8. Serial Data Gateway Module(1)»Remove

Installation Procedure


    Object ID: 5834490
  1. Serial Data Gateway Module(1)»Install

    2. Object ID: 5744844
  2. Connect the electrical connectors.
  3. Serial Data Gateway Bracket(2)»Install

    4. Caution: Refer to Fastener Caution.

  4. Serial Data Gateway Module Bracket Bolt(1)»Install and tighten[2x]2.5 N·m (22 lb in)

    5. Object ID: 4702538
  5. Radio Control Assembly(2)»Install—Radio Control Assembly Replacement

    6. Object ID: 4693229
  6. Instrument Panel Trim Pad - Right Side(1)»Install—Instrument Panel Trim Pad Replacement - Right Side

    7. Object ID: 4692425
  7. Install the left and right instrument panel center trim plate applique (1, 2).Instrument Panel Center Trim Plate Applique Replacement