Engine Oil Pressure Sensor Replacement

Removal Procedure

  1. Power Transfer Unit Case»Remove—Power Transfer Unit Case Replacement

    2. Object ID: 5671807
  2. Release harness retainer (2) and place aside wiring harness (1).

    3. Object ID: 4325380
  3. Electrical Connector(1)@Engine Oil Pressure Sensor»Disconnect
  4. Engine Oil Pressure Sensor(2)»Remove

Installation Procedure


    Object ID: 4325380
  1. Engine Oil Pressure Sensor(2)»Install and tighten35 N·m  (26 lb ft)
  2. Electrical Connector(1)@Engine Oil Pressure Sensor»Connect

    3. Object ID: 5671807
  3. Reposition wiring harness (1) and engage harness retainer (2).
  4. Power Transfer Unit Case»Install—Power Transfer Unit Case Replacement