Auxiliary Radiator Bracket Replacement - Right Side (LM2)
Removal Procedure

    Object ID: 5537676
  1. Front Bumper Fascia(2)»Remove—Front Bumper Fascia Removal and Installation

    2. Object ID: 5520779

    Note: Left side shown, right side similar.

  2. Remove the 6 right and left side headlamp bolts (1).

    3. Object ID: 5520782

    Note: Left side shown, right side similar.

  3. Remove the 6 right and left side headlamp bolts (1).

    4. Object ID: 5520784

    Note: Left side shown, right side similar.

  4. Release the front headlamp guide pins from the front bumper fascia guides (1).
  5. Remove the right and left side headlamps (2).
  6. Release the wiring harness retaining tabs.
  7. Disconnect all electrical connectors.

    8. Object ID: 5544167
  8. Loosen the left and right side front bumper fascia upper stiffener nut (1).
  9. Remove the left and right side front bumper fascia upper stiffener bolt (2).

    10. Object ID: 5544169
  10. Pull the front bumper fascia upper stiffener (1) up and out over the stud.
  11. Disconnect the electrical connector and reposition wiring harness.

    12. Object ID: 5548894
  12. Front Bumper Shutter Bolt(1)»Remove[9x]
  13. Front Bumper Shutter(2)»Remove

    14. Object ID: 5617848
  14. Radiator Air Side Baffle Retainer(2)»Remove[4x]
  15. Radiator Air Side Baffle(1)»Reposition

    16. Object ID: 5160909
  16. Auxiliary Radiator Bracket Bolt(1)»Remove[4x]
  17. Auxiliary Radiator Bracket- Right Side(2)»Remove
Installation Procedure

    Object ID: 5160909
  1. Auxiliary Radiator Bracket- Right Side(2)»Install

    2. Caution: Refer to Fastener Caution.

  2. Auxiliary Radiator Bracket Bolt(1)»Install and tighten[4x]—Fastener Specifications

    3. Object ID: 5617848
  3. Radiator Air Side Baffle(1)»Install
  4. Radiator Air Side Baffle Retainer(2)»Install[4x]

    5. Object ID: 5548894
  5. Front Bumper Shutter(2)»Install
  6. Front Bumper Shutter Bolt(1)»Install and tighten[9x]—Fastener Specifications
  7. Connect the electrical connectors and install wiring harness.

    8. Object ID: 5544169
  8. Front Bumper Fascia Upper Stiffener(1)»Install

    9. Object ID: 5544167
  9. Install and tighten the left and right side front bumper fascia upper stiffener bolt (2). Fastener Specifications
  10. Tighten the left and right side front bumper fascia upper stiffener nut (1).Fastener Specifications

    11. Object ID: 5520784

    Note: Left side shown, right side similar.

  11. Connect all electrical connectors.
  12. Secure the wiring harness retaining tabs.
  13. Install the right and left side headlamps (2).
  14. Secure the front headlamp guide pins to the front bumper fascia guides (1).

    15. Object ID: 5520782

    Note: Left side shown, right side similar.

  15. Install the 6 right and left side headlamp bolts (1). Fastener Specifications

    16. Object ID: 5520779

    Note: Left side shown, right side similar.

  16. Install the 6 right and left side headlamp bolts (1). Fastener Specifications

    17. Object ID: 5537676
  17. Front Bumper Fascia(2)»Install—Front Bumper Fascia Removal and Installation