Operating Conditions: Ignition ON

2nd Row Left Seat Belt Reminder Sensor Pad Enable Status

Disabled/Enabled

The scan tool displays if the left rear seat belt reminder sensor pad is enabled to the RCM.

2nd Row Left Seat Belt Reminder Sensor Pad Learn Status

Learned/Not Learned

The scan tool displays Learned or Not Learned. Learned is displayed if the left rear seat belt reminder sensor pad has been learned by the RCM.

2nd Row Left Seat Belt Status

Buckled/Unbuckled

The scan tool displays Buckled or Unbuckled. This is the state of the left rear seat belt switch when the seat belt is buckled or unbuckled.

2nd Row Middle Seat Belt Reminder Sensor Pad Enable Status

Disabled/Enabled

The scan tool displays if the rear middle seat belt reminder sensor pad is enabled to the RCM.

2nd Row Middle Seat Belt Reminder Sensor Pad Learn Status

Learned/Not Learned

The scan tool displays Learned or Not Learned. Learned is displayed if the rear middle seat belt reminder sensor pad has been learned by the RCM.

2nd Row Middle Seat Belt Status

Buckled/Unbuckled

The scan tool displays Buckled or Unbuckled. This is the state of the middle rear seat belt switch when the seat belt is buckled or unbuckled.

2nd Row Middle Seat Belt Reminder Sensor Pad Enable Status

Disabled/Enabled

The scan tool displays if the rear right seat belt reminder sensor pad is enabled to the RCM.

2nd Row Middle Seat Belt Reminder Sensor Pad Learn Status

Learned/Not Learned

The scan tool displays Learned or Not Learned. Learned is displayed if the rear right seat belt reminder sensor pad has been learned by the RCM.

2nd Row Right Seat Belt Status

Buckled/Unbuckled

The scan tool displays Buckled or Unbuckled. This is the state of the right rear seat belt switch when the seat belt is buckled or unbuckled.

Air Bag Malfunction Indicator

On/Off/Flashes

The scan tool will display On or Flashes if there is a problem with the SIR system. Any problems within the SIR system will illuminate the air bag indicator. The indicator will either flash or stay on.

Base Model Part Number

Varies, 8 Digit Number

The scan tool displays the part number of the RCM which is stored in non volatile memory.

Calibration Part Number

Varies, 8 Digit Number

The scan tool displays the part number of the calibration file in the RCM.

Deployment Loop 1-18 Enable Status

Enabled/Disabled

The scan tool displays Enabled or Disabled. This is the status of the air bag or pretensioner.

Deployment Loop 1-18 Learn Status

Learned/Not Learned

The scan tool displays Learned or Not learned. Learned is displayed if the RCM has defined the number loop programmed from an air bag or pretensioner.

Deployment Loop 1-18 Resistance

1.44–4.25 Ohms

The scan tool displays the resistance of the learned loop of the air bag or pretensioner when connected to the RCM.

Deployment Loop 1-18 Type

Varies

The scan tool displays the name of the air bag or pretensioner associated with the loop type 1–18.

Driver Seat Belt Reminder Indicator

On/Off

The scan tool displays On if this indicator is on. If the indicator is on it means the seat belt has not been buckled.

Driver Seat Belt Sensor Enable Status

Enabled/Disabled

The scan tool displays if the seat belt sensor in the seat belt buckle is enabled to the RCM.

Driver Seat Belt Sensor Learn Status

Learned/Not learned

The scan tool displays Learned or Not Learned. Learned is displayed if the driver seat belt sensor has been learned by the RCM.

Driver Seat Belt Status

Buckled/Unbuckled

The scan tool displays Buckled or Unbuckled. This is the state of the driver seat belt switch when the seat belt is buckled or unbuckled.

Driver Seat Position Sensor

Rearward/Forward

The scan tool will display if the driver seat is forward or rearward of the sensor set position.

Driver Seat Position Sensor Enable Status

Enabled/Disabled

The scan tool displays if the seat position sensor is enabled to the RCM.

Driver Seat Position Sensor Learn Status

Learned/Not Learned

The scan tool displays Learned or Not Learned. Learned is displayed if the driver seat position sensor has been learned by the RCM.

End Model Part Number

Varies, 8 Digit Number

The scan tool displays the part number of the RCM in production.

Impact Sensor 1-8 Enable Status

Enabled/Disabled

The scan tool displays Enabled or Disabled This is the status of the impact sensor.

Impact Sensor 1-8 Learn Status

Learned/Not Learned

The scan tool displays Learned or Not learned. Learned is displayed if the RCM has learned and has assigned a number to that impact sensor.

Impact Sensor 1-8 Type

Equipped/Not Equipped

The scan tool displays the name of the impact sensor associated with the type 1–8.

Restraint Control Module Module Primary Key

Hex Value

The scan tool indicates the primary key Hex value.

Manufacturer's Traceability Number

Varies, 16 Digit Number

The scan tool displays the 16 digit traceability number in the RCM.

Module Setup

Incomplete/Complete

The scan tool indicates if the RCM is set up.

Passenger Air Bag Disabled Switch

On/Off

The scan tool displays Off when the customer manually turns the passenger airbag off with this switch.

Passenger Air Bag Off Indicator

On/Off

The scan tool displays Off when the passenger indicator is not illuminated. This indicator is off when the disable switch is in the off position or no one is sitting in the passenger seat.

Passenger Air Bag On Indicator

On/Off

The scan tool displays On when the passenger indicator is illuminated. This indicator is on when the disable switch is in the on position and someone is sitting in the passenger seat.

Passenger Air Bag Status

Enabled/Disabled

The scan tool displays if the passenger air bag is enabled to the RCM.

Passenger Air Bag Disable Indicator Enable Status

Enabled/Disabled

The scan tool displays if the passenger air bag disable indicator is enabled to the RCM.

Passenger Air Bag Disable Indicator Learn Status

Learned/Not Learned

The scan tool displays Learned or Not Learned. Learned is displayed if the RCM has learned the status of the passenger air bag disable indicator.

Passenger Air Bag Disable Switch Enable Status

Enabled/Disabled

The scan tool displays if the passenger air bag disable switch is enabled to the RCM.

Passenger Air Bag Disable Switch Learn Status

Learned/Not Learned

The scan tool displays Learned or Not Learned. Learned is displayed if the RCM has learned the status of the passenger air bag disable switch.

Passenger Air Bag Enable Indicator Enable Status

Enabled/Disabled

The scan tool displays if the passenger air bag enable indicator is enabled to the RCM.

Passenger Air Bag Enable Indicator Learn Status

Learned/Not Learned

The scan tool displays Learned or Not Learned. Learned is displayed if the RCM has learned the status of the passenger air bag enable indicator.

Passenger Classification

00–07

The scan tool will display what type of individual is sitting in the passenger seat.

Passenger Presence Detection System Enable Status

Enabled/Disabled

The scan tool displays if the restraint occupation classification system is enabled to the RCM.

Passenger Presence Detection System Learn Status

Learned/Not Learned

The scan tool displays Learned or Not Learned. Learned is displayed if the RCM has learned the passenger presence system.

Passenger Presence Detection System Reporting DTC(s)

Yes/No

The RCM will report if there are DTCs set in the passenger presence module.

Passenger Seat Belt Reminder Indicator

On/Off

The scan tool displays On if this indicator is on. If the indicator is on it means the seat belt has not been buckled.

Passenger Seat Belt Reminder Indicator Enable Status

Disabled/Enabled

The scan tool displays if the passenger seat belt reminder indicator is enabled to the RCM.

Passenger Seat Belt Reminder Indicator Learn Status

Learned/Not Learned

The scan tool displays Learned or Not Learned. Learned is displayed if the passenger seat belt reminder indicator has been learned by the RCM.

Passenger Seat Belt Reminder Sensor Pad Enable Status

Disabled/Enabled

The scan tool displays if the passenger seat belt reminder sensor pad is enabled to the RCM.

Passenger Seat Belt Reminder Sensor Pad Learn Status

Learned/Not Learned

The scan tool displays Learned or Not Learned. Learned is displayed if the passenger seat belt reminder sensor pad has been learned by the RCM.

Passenger Seat Belt Sensor Enable Status

Enabled/Disabled

The scan tool displays if the seat position sensor is enabled to the RCM.

Passenger Seat Belt Sensor Learn Status

Learned/Not learned

The scan tool displays Learned or Not Learned. Learned is displayed if the passenger seat belt sensor has been learned by the RCM.

Passenger Seat Belt Status

Buckled/Unbuckled

The scan tool displays Buckled or Unbuckled. This is the state of the passenger seat belt switch when the seat belt is buckled or unbuckled.

Passenger Seat Occupancy Status

Empty Seat/Occupied

The scan tool displays Occupied if someone is sitting in the passenger seat.

Passenger Seat Position Sensor

Rearward/Forward

The scan tool will display if the passenger seat is forward or rearward of the sensor set position.

Passenger Seat Position Sensor Enable Status

Disabled/Enabled

The scan tool displays if the passenger seat position sensor pad is enabled to the RCM.

Passenger Seat Position Sensor Learn Status

Learned/Not Learned

The scan tool displays Learned or Not Learned. Learned is displayed if the passenger seat position sensor has been learned by the RCM.

Power Mode

Off/Accessory/Run/Crank Request

The scan tool will display the power mode of the vehicle.

Primary Key Status

Valid/Invalid

The scan tool displays Valid if the primary key matches what is stored to memory in the RCM.

Primary Key Status Last Ignition Cycle

Invalid/Valid

The RCM checks to see if the primary key data received is valid.

Received Primary Key

Hex Value

The scan tool displays a Hex value indicating the RCM received primary key data.

Rollover Sensor Enable Status

Disabled/Enabled

The scan tool displays if the rollover sensor is enabled to the RCM.

Rollover Sensor Learn Status

Learn/Unlearn

The scan tool displays Learned or Not Learned. Learned is displayed if the rollover sensor has been learned by the RCM.

Security Code Accepted

Yes/No

The RCM either accepts the security code or it does not. The scan tool displays Yes if the security code has been accepted by the RCM.

Security Code Lockout

Yes/No

The scan tool displays Yes if the RCM has been locked out because of the security code not being accepted.

Security Code Lockout Active Timer

Random Value

The RCM uses a timer before the security code is locked in the RCM.

Security Code Programmed

Yes/No

The scan tool displays Yes if the RCM has been programmed with the security code.

Security Code Programming Counter

Random Value

The RCM uses a counter for the value of the security code programming.

Security Code Reset Counter

Random Value

The RCM uses a counter to reset the value of the security code.

Software Part Number

Varies, 8 Digit Number

The scan tool displays the software part number in the RCM.

Vehicle Identification Number

Varies, 17 Digit Number

The VIN number of the vehicle programmed into the RCM.

VIN Programmed

Yes/No

The scan tool displays Yes if the VIN has been programmed into the RCM.

VIN Programming Counter

Random Value

The RCM uses this counter while programming the VIN.